Description: Hornady Lock N Load case feeder 3d printed black. This case feeder will run most calibers except 10mm. So in other words, there are 4 turret holes: the first hole will run 223/300 blackout, the other three will run anything within the two listed diameters. 2nd, (listed 44M/ 45 LC) .357/45 long colt, 3rd. 45/9mm, 4th, 8mm/30-06. Condition is "New" Fully assembled! You will need the following: 2x 1/4"-20 x 3/4" long bolts to mount this to your press (it is your responsibility to make sure you have a newer style press with the mounting holes on the back to accept the two 1/4 X20 bolts to mount a case feeder!) & 3 small 5/8 sheet metal screws if you want to mount the stabilizer to your reloading bench. It takes some time getting the mounting height correct, and the pawls on the Lock-N-Load might need some tweaking. But you could see below the final result is most satisfying! this case feeder dose all calibers including all rifle calibers. These come with a life time warranty, just send pictures of parts and cover the shipping! Please note this unit also comes with 4 tubes. See Video for the working case feeder below. ►https://www.youtube.com/embed/rXjUNVNkylU?rel=0
Price: 115 USD
Location: Seymour, Connecticut
End Time: 2024-09-09T16:47:49.000Z
Shipping Cost: 18.8 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Hornady
Type: Reloading Press
Ammunition Type: Handgun
Gauge/Caliber: .223 Remington
Press Type: Progressive
