Skunk2 K-Series K24A2 K24A4 K24A8 Ultra Series Street Intake Manifold Black 1.8L

Description: --> Add to Favorites Home About Us Feedback New Arrivals Ending Soon Contact Us --> Skunk2 K-Series K24A2 K24A4 K24A8 Ultra Series Street Intake Manifold Black 1.8L Description Includes K-Tuned Coolant Adapter KTD-K24-IM2 to use a K20 intake manifold on K24 engine. 71mm throttle body opening, Early PRB/PRC Flange Note: Includes K-Tuned Coolant Adapter KTD-K24-IM2 to use a K20 intake manifold on K24 engine. 71mm throttle body opening, Early PRB/PRC Flange Car Make: Honda Acura Car Model: TSX / Accord / Element Years: 03-07 Accord / 04-08 TSX / 03-11 Element Engine: K24A JDM, K24A2, K24A4, K24A8 Manufacturer Product Specifications This kit includes Skunk2 K-Series K20 Ultra Series Street Intake Manifold Black 1.8L and K-Tuned Coolant Adapter KTD-K24-IM2 to use this K20 Intake Manifold on a K24A JDM, K24A2, K24A4, or K24A8 Engine. The much anticipated Ultra "Street" Intake Manifold for the K24A JDM, K24A2, K24A4, K24A8 engines or cylinder heads has finally arrived! The Ultra Series is years of research and development, culminated in a multi-piece cast aluminum intake manifold that offers advantages that only a modular design could allow. Using the latest in CFD (Computational Fluid Dynamics) software; Skunk2 Racing has created a two-piece modular design that allows for easy disassembly, porting, and plenum volume changes through the use of a removable plenum lid and optional plenum spacers. In addition to CFD testing, the Ultra Series Intake Manifold has undergone extensive in-house dyno testing which has led to a design that is less restrictive, yielding both torque and power gains well over many of the competitors. Skunk2 Racing Ultra Street Intake Manifolds are cast-aluminum, manufactured from high-grade 356 aluminum alloy for strength and lightweight. Each manifold is CNC-machined for a precise fit, and individually inspected for quality assurance. The Ultra Series Street manifold features a generous 71mm throttle body opening and is constructed with thick walls at entry, minimizing concerns of breakthrough when port matching. Intense planning and design went into the plenum to distribute even airflow to all four cylinders under dynamic load conditions. Placement and design of the velocity stacks were rigorously flow tested to ensure maximum delivery of air to the cylinder. Large velocity stack raised bell mouth entries lead to 6.85” long intake runners with smooth transitions allowing the Ultra Street Intake Manifold to really move some air! Skunk2 Racing Ultra Street Intake Manifolds are designed to be used in modified naturally aspirated applications as well as mild turbo/supercharged setups. FEATURES: Modular 2pc. Design w/ Removable Plenum Rotatable Plenum Allows Driver-side or Passenger-Side Throttle Body Mounting 1.8L Plenum Volume** Tapered 6.85" Long High-Velocity Runners w/ Raised Velocity Stack Entries Generously Cast Runner Walls for Porting 71mm Throttle Body Opening Lightweight 356 Aluminum Alloy Construction Hi-Grade Mounting Hardware Thermal Gasket Included 2 x 1/4" NPT and 2 x 1/8" NPT Accessory Ports K-Tuned K24 Intake Manifold Adapter Coolant Adapter KTD-K24-IM2 Application: All K24 Engines Note: *When installing that the adapter gets mounted directly to the head (Do Not Install A Gasket Between The Head and The Adapter) The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter. The adapter lowers intake air temps as coolant is no longer connected the intake manifold. Hondata has shown that intake air density will drop 1% for every 5°F increase in intake temperature. This is wasted power that can easily be gained back by using the adapter. The adapter also features a 1/8 NPT port for a coolant temp sensor commonly used in swap cars. The Intake Manifold Adapter can be installed either using our spring loaded tab or by tapping the head. We use Honda Bond or similar gasket maker as it provides a strong seal and when using the spring loaded tab when the adapter isn’t under pressure there will be no chance of leak. The spring loaded tab holds the adapter down with constant spring pressure to ensure a tight fit and seal. The other option is using the provided blind hole you can easily tap the head for the second hole. Tapping the head will require a 6.5mm drill bit (to finish the blind hole in the adapter), 5mm drill bit (to drill the head), and M6x1.0 Tap. Quick Instructions: Required Tools Drill 1/4 or 6.5mm drill bit 13/64 or 5mm drill bit M6x1.0 tap (Standard and bottoming) Begin by using the 6.5mm or ¼ drill bit to finish the blind hole in the adapter. You then want to install the manifold and adapter on the head. This will ensure you are properly positioning the hole. Once you have marked where you want to drill remove the manifold and adapter. Place tape or plug the holes on the head for intake and coolant to prevent anything from getting inside. You will use a 5mm or 13/64 drill bit to drill the head to a depth of at least 11mm (the depth of the bolt) but shouldn’t need more than 14mm. You can apply tape on the drill bit to ensure not to drill too deep. Once you drill the hole you will run your tap. Use a M6x1.0 tap and lube and do it slowly. Be careful not to tap too deep. You can start the thread with a standard tap but you should finish it using a bottoming tap. This will allow the bolt to use most of the tapped hole. Slowly start to tap the head and check fitment of your adapter often. You want the adapter to hold snug but not tap the hole to far. Payment Almost all of our eBay Listings are "Buy it Now" which means payment is due immediately at the time of purchase. Return Policy: We allow returns of unopened product within 30 days of the purchase date for a money-back refund. If the original packaging is missing or damaged, or if it has been longer than 30 days since you purchased the item, there may be restocking fees incurred. Please message us for a Return Authorization Number before sending anything back to avoid processing delays. --> AbouT us Real Street Performance is unlike most "Race Shops". We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses. - Best Pricing - Fast Shipping - Immediate Response Time - Experienced in International Export - 100% Positive Customer Satisfaction Feedback Rating Shipping Info WE CAN ONLY SHIP TO THE ADDRESS ENTERED DURING CHECKOUT. Most domestic orders ship within 5 days, please allow up to 7-10 days for international orders to ship. We are very familiar with International Export procedures and we ship out of the country every day. If you are a customer outside of the United States of America, have no worries, we will get your parts to you quickly and correctly, many times just as quickly as our domestic shipments. Some shipping destinations will require additional shipping, these customers will be contacted immediately after placing their order. Feel free to contact us before placing your purchase for an exact shipping quote. Import Duties, Taxes, and Charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Quoted shipping does not include insurance. If you would like to add insurance to your contact us here to go over the options. Please note that eBay requires all orders $750.00 and above to have Signature confirmation, so if your package total is $750.00 or more, your shipment will require a signature. Even though we are based in Florida, not all orders ship complete from our Florida location. Please be aware that some parts will ship directly from other states to your location. Please message us before clicking buy-now to check location availability if this is a concern of yours. PLEASE NOTE, ORDERS TO THE FOLLOWING COUNTRIES WILL BE SHIPPED VIA USPS INTERNATIONAL TO AVOID DELAYS AND COMPLICATIONS, UNLESS SPECIFICALLY REQUESTED BY THE BUYER TO SHIP VIA UPS: - Russia - Brazil - Greece Our Services --> 20,000 sqft Facility in Sanford, FL Our new facility is located in sunny Sanford Florida, but we ship all over the world every day with the most competitive rates. Useful Links Store Home About Us Feedback New Arrivals Ending Soon Contact Us Add to Favorites We Accept Payment --> Sign up to our Newsletter Add my Store to your favorites and receive my email newsletters about new items and special promotions! Subscribe Copyright © 2017 Real Street Performance. All rights reserved.

Price: 673.48 USD

Location: Sanford, Florida

End Time: 2025-01-06T22:02:22.000Z

Shipping Cost: N/A USD